Description: Dear customers, PLEASE NOTE: THE COPY CATS WITH THEIR CHEAP CLONES ARE AT IT AGAIN!! This happens a lot lately on eBay...PLEASE read everyone's feedbacks...we've been here for 25+ years ...they pop up with new accounts, so be sure to click their USER ID's and you will see they are CHINA ACCOUNTS with USA addresses. NEXT be sure to check their item's photos and read the descriptions and you'll see that all of it copied stolen from our listings. They are trying to clone our product in CHINA and sell it you here under the ruse of "USA SELLER"...please don't be fooled. We are proud of and stand behind all our products 100%. THESE ARE A VERY HIGH QUALITY WIDE ANGLE TRUE GLASS MIRROR IN RUBBER MOUNT WITH A STAINLESS STEEL HOUSING. THESE ARE NOT CHEAP LIGHT WEIGHT PLASTIC. Please be sure to compare what you are buying and not just the price...there is a huge difference between our mirrors and others that are selling cheep knock offs. Don't just take our word for it...Please take a moment to read through our stack of feedbacks to see what our previous customers think about them. THESE ARE BUILT TO LAST AND WILL GIVE YOU YEARS OF SERVICE. THEY HAVE A "SWING STYLE" MOUNT so you can easily tilt them UP AND OUT OF YOUR WAY if needed so you won't have to duck to try to avoid banging your head every time you get in and out of machine. They also mount UP HIGH to the roof, where they belong, not in the way on the machine's cross member. FACT: We have been offering these for well over 23 years and in that time we have seen MANY cheap "Copy Cats" come and go, all we ask is that you please be sure you are comparing apples to apples... such as: Stainless steel housing, Stainless Steel nuts & bolts, Stainless steel brackets....or cheap tin that will rust or plastic the dries out and cracks?. Swing style mount so don't bang your head or have to duck........or solid or center mount stuck in your way all the time? TRUE REAL GLASS convex mirror so you will always have A SUPER CLEAR VIEW....or a cheap plastic lens that fades, scratches and YELLOWS? Glass mirror with a rubber mount set into stainless steel housing and solid stainless steel bracket to hold it steady while also protecting it from vibrations of machine......or cheap flimsy plastic or thin tin mount that vibrates? NO DRILLING: Our mirrors DO NOT just slap onto your machine with a couple of sheet metal screws....we include a stainless steel backing bracket along with stainless steel nuts and bolts that clamp thru the cage of your mahine so that NO DRILLING INTO YOUR EXPENSIVE MACHINE !! PLEASE READ BELOW FOR A COMPLETE AND FULL DESCRIPTION, THANK YOU....and we are always more then happy to answer questions!! We are now in the 5th generation of a family who has been in their own businesses of providing service and products and we are celebrating our 26th year with EBAY. We are very proud of our reputation as well as our products and no matter what we will continue to keep customer satisfaction and high quality as our main goals. As a customer appreciation THANK YOU to all our customers both old and new on eBay we are still offering our "KEEP IT SAFE" Sale on our full line of mirrors. Plus our BUY IT NOW "KEEP IT SAFE" Sale price INCLUDES FREE PRIORITY MAIL TO ANY OF THE 50 UNITED STATES. (we also ship internationally for an additional shipping fee that can vary by country) This is our special way of celebrating over 36 years in business and our 26th successful year with eBay. THANK YOU again and here’s to a prosperous and SAFE work season for everyone !!!! ******************************************************************************************************* This listing is for a brand new "OVERHEAD MOUNT", VERY HIGH QUALITY, REAL GLASS & STAINLESS STEEL 4 x 8 inch WIDE ANGLE Rear-View Mirror for all types of skid steers, forklifts, loaders, and etc. with all mounting hardware and brackets included. This is an extremely high quality GLASS, 4 inch x 8 inch convex mirror which provides a very sharp, clear view (NOT plastic so they will NOT yellow and scratch and loose clarity) and it is set in a rubber mount for shock & vibration resistances, plus it has a STAINLESS STEEL housing (not tin so they will not rust out). The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning. Once you position and aim the mirror to your taste, our mount style allows you to completely LOCK in that position (if so desired) so that it will not loose it's adjusted view from the constant vibration and bouncing around that anyone who operates a skid steer is well aware of. The MOUNTING BRACKET and the BACKING BRACKET are also made from STAINLESS STEEL, as are ALL of the nuts, washers and bolts. TOP QUALITY + STAINLESS STEEL HOUSING & HARDWARE = LONG LIFE & NO RUST! This mirror will give you years of service and always look great. This high quality mirror comes with all the needed hardware to mount it to your machine (4 bolts, 2 nuts, 2 lock washer, 2 locking nuts, plus a backing plate and complete instructions). The bracket is designed to clamp thru the grate on the top of the cage of the machine so no drilling is required and the only tools you will need to install them are a couple of 7/16" wrenches.... and of course for machines without a cage it can also be mounted solid by screwing it directly to any desired location (please note, we provide all stainless steel nuts and bolts for attaching the mirror to the cage but if you decided to screw it directly to another location then you will need to provide a couple of your own sheet metal screws). The mounting bracket is designed for machines without glass enclosures or for machines that are equipped with a glass enclosure as long as the glass is approx. 3/4" ABOVE the overhead cage. If the glass is 3/4" above the cage you will be able to mount the mirror without glass removal. If your ceiling glass is BELOW the top of the cage or if it is less than 3/4" above the cage, the mirror can still be installed but PLEASE email us for more specific instructions about how you will have to mount it BEFORE bidding. This mirror will greatly help reduce the blind spots for safety and they will give you a nice wide rear viewing area. It is also ISO9001/QS9000 certified. We are very proud of our reputation as well as our products and no matter what we will continue to keep customer satisfaction and high quality as our main goals. We ship immediately via PRIORITY MAIL to anywhere in the 50 UNITED STATES (And for our Canadian neighbors, we ship via International First Class Mail for $29.95....shipping to other countries varies, prices listed under shipping details). Please check out our other auctions for our double "side mount" rear-view mirrors as well as our combo sets. THANKS for looking and GOOD LUCK.
Price: 35.95 USD
Location: Statesville, North Carolina
End Time: 2024-02-02T23:31:58.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Non-Domestic Product: No
Compatible Equipment Type: Skid Steer, Bobcat, Skidsteer, loader, John Deere, Case, Cat, Articulated Dump Truck, Asphalt & Concrete Paver, Backhoe Loader, Bale Wagon, Boom Lift, Combine, Compactor & Asphalt Roller, Cotton Picker, Cotton Stripper, Crane
Custom Bundle: No
Make: Fits all brands
MPN: 4x8 Wide
Implement Use: Construction
Equipment Type: Skid steer Backhoe Dozer
Modified Item: No
Brand: Fits Bobcat New Holland etc.
Model Year: all
Type: Stainless Steel
Implement+Use: Farm
Product Type: Mirrors
Model: all
Attachment Type: Skid Steers
Compatible Equipment Make: cat, jd, Universal, Bobcat, Case, Gehl, John Deere
Equipment Make: Fits All Types
Part Type: Mirror
