Viofo HK3 3-Wire ACC Hardwire Kit (with or without a Tap-A-Fuse Kit)

Description: Viofo HK3 3-Wire ACC Hardwire Kit (with or without a Tap-A-Fuse Kit) This is the new Viofo HK3 3-wire hardwire kit specifically for the A119V3, A129 and A129 DUO dash cameras. The plus is a miniUSB. This kit is required if you want the camera to automatically and instantly enter parking mode once the vehicle engine has been shut off. Compatible with the Viofo A119V3, A129, A129 Plus and A129 Pro dash cameras only. This includes the DUO versions of these cameras as well as the DUO IR. Shipping is free when purchased with a dash camera. 4 voltage cutoff selection points - 12.4V, 12.2V, 12V and 11.8V (24.8V, 24.4V, 24V and 23.6V if your vehicle has a 24V system). The overall length of the kit is about 13 feet (4 meters). From the tap ends of the red, yellow and black wires (where they tap into the fuse box) to the converter box is about 3.25 feet. From the converter box to the miniUSB plug is about 9.8 feet. Your Viofo A129 camera MUST be running firmware V1.5 or later. Firmware updates for the A129 can be found on the Capture Your Action website. All firmware versions of the A129 Pro, A129 DUO IR and A119V3 support the Viofo 3-wire kit when powered through the mount or direct to the camera. Older versions of the A129 must be powered directly and not through the mount for the 3-wire and parking mode to function correctly. If your experiencing issues, try applying power directly to the camera. Newer A129's support the 3-wire kit being plugged in through the mount or direct to the camera. *There are 5 options to choose from. You can purchase the 3-wire kit only or with any of the 4 Tap-A-Fuse kits we carry. If you order with a Tap-A-Fuse kit, you will receive the Viofo 3-wire hardwire kit plus 2 of the Tap-A-Fuse wire kits of your fuse type, as the Viofo 3-wire kit requires you to tap into 2 different fuses in your vehicles fuse box. Each Tap-A-Fuse wire with come with a 5A fuse. Please be sure to know exactly which fuse type your vehicle has before ordering this hardwire kit with a Tap-A-Fuse kit. We try to be as accurate as possible with fuse types, but there are many different types and names which tend to change depending on which resource your using. Please see the picture below to identify your fuse type. This is how we have labeled our Tap-A-Fuse kits. Please contact Capture Your Action if you have any questions before purchasing. **All three wires need to be connected for the kit to function correctly. Listing and template services provided by inkFrog

Price: 12.95 USD

Location: Exeter, New Hampshire

End Time: 2024-02-21T03:19:30.000Z

Shipping Cost: 4.5 USD