solid-carbide

You May Like

NEW 1/2" GWS SOLID CARBIDE END MILLS .030" RADIUS 5 FLUTE MILLING LATHE TOOL BIT
NEW 1/2" GWS SOLID CARBIDE END MILLS .030" RADIUS 5 FLUTE MILLING LATHE TOOL BIT

$34.75

View Details
NEW 1/2" MELIN CRMG SOLID CARBIDE ROUGHING END MILL MILLING ROUGHER LATHE TOOL
NEW 1/2" MELIN CRMG SOLID CARBIDE ROUGHING END MILL MILLING ROUGHER LATHE TOOL

$39.75

View Details
2Pcs 3/4" 4 Flute Solid Carbide 1-1/2" LOC x 4" OVL End Mill - AlTiN Coated
2Pcs 3/4" 4 Flute Solid Carbide 1-1/2" LOC x 4" OVL End Mill - AlTiN Coated

$101.99

View Details
5 Flute Solid Carbide 3/4" x 2-3/4" x 6" Long End Mill - TiALN Coated - USA
5 Flute Solid Carbide 3/4" x 2-3/4" x 6" Long End Mill - TiALN Coated - USA

$86.99

View Details
5Pcs 4 Flute 5/32" x 3/16" x 9/16" x 2" Solid Carbide End Mills - AlTiN Coated
5Pcs 4 Flute 5/32" x 3/16" x 9/16" x 2" Solid Carbide End Mills - AlTiN Coated

$25.99

View Details
5Set 3/16" 4 Flute 2" Overall Length Regular Carbide End Mill TiALN COATED New
5Set 3/16" 4 Flute 2" Overall Length Regular Carbide End Mill TiALN COATED New

$15.94

View Details
LOT ( 5 ) KYOCERA SGS 32664 V-CARB SOLID CARBIDE 1/2" 5 FLUTE END MILLS SET
LOT ( 5 ) KYOCERA SGS 32664 V-CARB SOLID CARBIDE 1/2" 5 FLUTE END MILLS SET

$159.75

View Details
SOLID CARBIDE C08K-SCLCR06 INDEXABLE LATHE BORING BAR 8 MM SHANK + CCGT060202L-F
SOLID CARBIDE C08K-SCLCR06 INDEXABLE LATHE BORING BAR 8 MM SHANK + CCGT060202L-F

$34.96

View Details
TOOL$AVER Solid Carbide Boring Bar 1/2" x 5.50" C08-SCLCR3 (CCMT 32.52) USA MADE
TOOL$AVER Solid Carbide Boring Bar 1/2" x 5.50" C08-SCLCR3 (CCMT 32.52) USA MADE

$98.00

View Details
TOOL$AVER Solid Carbide Boring Bar 1/2" x 5.50" C08-SCLCR2 (CCMT 21.51) USA MADE
TOOL$AVER Solid Carbide Boring Bar 1/2" x 5.50" C08-SCLCR2 (CCMT 21.51) USA MADE

$98.00

View Details
5 Pcs 1/4" 4 Flute 2-1/2" Overall Length Regular Carbide End Mill - TiALN COATED
5 Pcs 1/4" 4 Flute 2-1/2" Overall Length Regular Carbide End Mill - TiALN COATED

$36.45

View Details
(Lot of 10) OSG 5/32" Solid Carbide TiALN Coated Double End Mills
(Lot of 10) OSG 5/32" Solid Carbide TiALN Coated Double End Mills

$69.99

View Details
5Pcs 4 Flute 1/2" x 1-1/4" x 3" Solid Carbide Roughing End Mills - TiALN New
5Pcs 4 Flute 1/2" x 1-1/4" x 3" Solid Carbide Roughing End Mills - TiALN New

$128.99

View Details
SOLID CARBIDE Chainsaw 0.325" - 0.058" ANY LENGTH NO *Coated* Junk - SEE VIDEO
SOLID CARBIDE Chainsaw 0.325" - 0.058" ANY LENGTH NO *Coated* Junk - SEE VIDEO

$72.99

View Details
SOLID CARBIDE Chainsaw 3/8" 0.050 LP Type 91 ANY LENGTH *NO Coated Junk* VIDEO
SOLID CARBIDE Chainsaw 3/8" 0.050 LP Type 91 ANY LENGTH *NO Coated Junk* VIDEO

$68.99

View Details
LOT ( 5 PCS ) KYOCERA SGS 39111 SOLID CARBIDE 3/32" END MILLS LATHE CNC TOOLS
LOT ( 5 PCS ) KYOCERA SGS 39111 SOLID CARBIDE 3/32" END MILLS LATHE CNC TOOLS

$39.75

View Details
Lot Of 50pcs 1/8” Diameter Shank Solid Carbide Ball End Mills Mostly .086 Dia
Lot Of 50pcs 1/8” Diameter Shank Solid Carbide Ball End Mills Mostly .086 Dia

$12.75

View Details
Widia Hanita 7mm Solid Carbide Endmill 6 Flute D51807003W WP15PE (LOC2648A)
Widia Hanita 7mm Solid Carbide Endmill 6 Flute D51807003W WP15PE (LOC2648A)

$33.95

View Details
KLOT 10pcs Solid Carbide Drill Bit 3.175mm 1/8" 2-Flute Straight Shank K10
KLOT 10pcs Solid Carbide Drill Bit 3.175mm 1/8" 2-Flute Straight Shank K10

$16.99

View Details
NEW GUHRING SOLID CARBIDE JOBBER DRILL Ø 3/8" x 4" LOC x 6" OAL TiAlN COATING
NEW GUHRING SOLID CARBIDE JOBBER DRILL Ø 3/8" x 4" LOC x 6" OAL TiAlN COATING

$30.00

View Details
LOT ( 2 ) NEW NIAGARA 8MM SOLID CARBIDE EDP N09651 END MILLS MILLING LATHE TOOL
LOT ( 2 ) NEW NIAGARA 8MM SOLID CARBIDE EDP N09651 END MILLS MILLING LATHE TOOL

$24.75

View Details
5PCS 1/4" 4 FLUTE LONG CARBIDE END MILL - TiALN COATED
5PCS 1/4" 4 FLUTE LONG CARBIDE END MILL - TiALN COATED

$29.70

View Details
NEW KYOCERA SGS 32664 V-CARB SOLID CARBIDE 1/2" END MILL 5 FLUTE MILLING TOOL
NEW KYOCERA SGS 32664 V-CARB SOLID CARBIDE 1/2" END MILL 5 FLUTE MILLING TOOL

$34.75

View Details
1/2" 4 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated
1/2" 4 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated

$29.99

View Details
NEW Onsrud 60-173 MC 1/2" Compression 2 Flute 1 3/8" Solid Carbide Bit
NEW Onsrud 60-173 MC 1/2" Compression 2 Flute 1 3/8" Solid Carbide Bit

$25.00

View Details
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED USA
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED USA

$58.99

View Details
1 pc Melin Solid Carbide Drill 5/32" HDR 5/32 New (454)
1 pc Melin Solid Carbide Drill 5/32" HDR 5/32 New (454)

$12.00

View Details
#60 .040" Solid Carbide Drill Bits - FIVE PIECES - 1/8" Shank .04" Premium R/S
#60 .040" Solid Carbide Drill Bits - FIVE PIECES - 1/8" Shank .04" Premium R/S

$15.74

View Details
1/2" 4 FLUTE VARIABLE HELIX CARBIDE END MILL SQUARE END TiALN COATED
1/2" 4 FLUTE VARIABLE HELIX CARBIDE END MILL SQUARE END TiALN COATED

$30.95

View Details
LOT ( 5 ) KENNAMETAL 1/16" SOLID CARBIDE BALL NOSE END MILLS MACHINIST TOOL SET
LOT ( 5 ) KENNAMETAL 1/16" SOLID CARBIDE BALL NOSE END MILLS MACHINIST TOOL SET

$39.75

View Details
SGS 6.3mm Solid Carbide Drill 3xD TA Coating 145° Point Angle HIPERCARB USA Made
SGS 6.3mm Solid Carbide Drill 3xD TA Coating 145° Point Angle HIPERCARB USA Made

$36.99

View Details
CGS 107397 Carbide Square End Mill 3/8" 5FL AlTiN
CGS 107397 Carbide Square End Mill 3/8" 5FL AlTiN

$26.22

View Details
NEW GORILLA 1" INCH USA SOLID CARBIDE END MILL 4 FLUTE MILLING MACHINIST TOOL
NEW GORILLA 1" INCH USA SOLID CARBIDE END MILL 4 FLUTE MILLING MACHINIST TOOL

$89.75

View Details
5× 4 Flute 5/64" x 1/8" x 1/4" x 1-1/2" Solid Carbide End Mills - AlTiN Coated
5× 4 Flute 5/64" x 1/8" x 1/4" x 1-1/2" Solid Carbide End Mills - AlTiN Coated

$13.82

View Details
1 NEW USA 5MM SOLID CARBIDE SPIRAL DRILL. WITH COOLANT. CTD. LONG LENGTH. (W929)
1 NEW USA 5MM SOLID CARBIDE SPIRAL DRILL. WITH COOLANT. CTD. LONG LENGTH. (W929)

$29.95

View Details
NEW KYOCERA SGS 32575 V-CARB SOLID CARBIDE 1/2" END MILL .030" RADIUS LATHE TOOL
NEW KYOCERA SGS 32575 V-CARB SOLID CARBIDE 1/2" END MILL .030" RADIUS LATHE TOOL

$39.75

View Details
1/4" 4 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated
1/4" 4 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated

$16.49

View Details
1Pcs 4 Flute 1/4" x 1-1/2" x 4" Long Solid Carbide End Mill - TiALN Coated - US
1Pcs 4 Flute 1/4" x 1-1/2" x 4" Long Solid Carbide End Mill - TiALN Coated - US

$16.42

View Details
5Pcs 4 Flute 1/2" x 1-1/4" x 3" Solid Carbide End Mills AlTiN Coated CNC Bit
5Pcs 4 Flute 1/2" x 1-1/4" x 3" Solid Carbide End Mills AlTiN Coated CNC Bit

$93.99

View Details
4 Flute Solid Carbide 1/2" x 2" x 4" Roughing End Mill - ALCrSiN Nano Coated
4 Flute Solid Carbide 1/2" x 2" x 4" Roughing End Mill - ALCrSiN Nano Coated

$37.99

View Details
Garr Solid Carbide 1/4” Endmills Lot Of 20 Lot 2
Garr Solid Carbide 1/4” Endmills Lot Of 20 Lot 2

$59.00

View Details
10Pcs 4 Flute Solid Carbide 1/8" x 1/2" x 1-1/2" End Mills - AlTiN Coated
10Pcs 4 Flute Solid Carbide 1/8" x 1/2" x 1-1/2" End Mills - AlTiN Coated

$27.99

View Details
SOLID CARBIDE CENTER DRILL #2 - 60 DEG -USA- CENTERDRILL HTC 585-0782 - NEW!
SOLID CARBIDE CENTER DRILL #2 - 60 DEG -USA- CENTERDRILL HTC 585-0782 - NEW!

$7.95

View Details
10pcs solid carbide Tialn coated #2 center drills 5/64x3/16x1-7/8" #530-CTN-2
10pcs solid carbide Tialn coated #2 center drills 5/64x3/16x1-7/8" #530-CTN-2

$69.00

View Details
1/4", VARIABLE PITCH & HELIX, SQUARE,4 FLUTE CARBIDE END MILL, TiAlN COATED
1/4", VARIABLE PITCH & HELIX, SQUARE,4 FLUTE CARBIDE END MILL, TiAlN COATED

$16.00

View Details
6Pcs 4 Flute Solid Carbide 1/8" - 1/2" End Mills Set - AlTiN Coated
6Pcs 4 Flute Solid Carbide 1/8" - 1/2" End Mills Set - AlTiN Coated

$56.99

View Details
6Pcs 4 Flute Solid Carbide 1/8" - 1/2" End Mills Set - AlTiN Coated
6Pcs 4 Flute Solid Carbide 1/8" - 1/2" End Mills Set - AlTiN Coated

$52.16

View Details
Monster Tool 3/4" Ball End Mill, Solid Carbide, 3FL, 1.5"LOC-4"OAL New/Old Stock
Monster Tool 3/4" Ball End Mill, Solid Carbide, 3FL, 1.5"LOC-4"OAL New/Old Stock

$19.99

View Details
1/4" 4 Flute 60 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated
1/4" 4 Flute 60 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated

$15.99

View Details
Seco Coolant Solid Carbide/ 02897864/ 11/64”/.172(1 Pc In Lot)3067-A6
Seco Coolant Solid Carbide/ 02897864/ 11/64”/.172(1 Pc In Lot)3067-A6

$30.00

View Details
5Pcs 4 Flute 3/16" x 5/8" x 2" Solid Carbide Roughing End Mills - ALCrSiN Coated
5Pcs 4 Flute 3/16" x 5/8" x 2" Solid Carbide Roughing End Mills - ALCrSiN Coated

$35.99

View Details
1/2" 4 Flute Solid Carbide 2" LOC x 4" OVL Long End Mill - AlTiN Coated
1/2" 4 Flute Solid Carbide 2" LOC x 4" OVL Long End Mill - AlTiN Coated

$29.99

View Details
6Pcs 3 Flute Solid Carbide End Mills 1/8" - 1/2" Set For Aluminum - ZRN Coated
6Pcs 3 Flute Solid Carbide End Mills 1/8" - 1/2" Set For Aluminum - ZRN Coated

$53.99

View Details
10 PACK - 3/16" DRILL BIT Jobber Length Solid Carbide 2 Twist USA 550-1875
10 PACK - 3/16" DRILL BIT Jobber Length Solid Carbide 2 Twist USA 550-1875

$125.00

View Details
Stainless Steel YG6 Tungsten Solid Carbide Drill Bits Set Stub Length Twist US
Stainless Steel YG6 Tungsten Solid Carbide Drill Bits Set Stub Length Twist US

$10.79

View Details
1 NEW MICRO 100 SOLID CARBIDE BORING BAR. BB-120600. USA MADE (A176)
1 NEW MICRO 100 SOLID CARBIDE BORING BAR. BB-120600. USA MADE (A176)

$17.50

View Details
Flush Trim Solid Carbide Spiral Router Bit Down Cut Up Cut Flush Trim Router Bit
Flush Trim Solid Carbide Spiral Router Bit Down Cut Up Cut Flush Trim Router Bit

$12.89

View Details
5/32" (.1562") CARBIDE END MILL 4 FLUTE KYOCERA 1810-1563.500 - SALE
5/32" (.1562") CARBIDE END MILL 4 FLUTE KYOCERA 1810-1563.500 - SALE

$7.80

View Details
Sandvik CoroTurn® CXS-06G117-6215R 1025 XS Solid Carbide Tool For Grooving
Sandvik CoroTurn® CXS-06G117-6215R 1025 XS Solid Carbide Tool For Grooving

$22.99

View Details
OSG 17/64" 6.75mm Dia. 5xD Sc Slow Spiral Solid Carbide Drill 215-2656
OSG 17/64" 6.75mm Dia. 5xD Sc Slow Spiral Solid Carbide Drill 215-2656

$8.49

View Details
.040" DIAMETER MINITURE SOLID CARBIDE END MILL 4 FLUTE SINGLE END OSG 494-0400
.040" DIAMETER MINITURE SOLID CARBIDE END MILL 4 FLUTE SINGLE END OSG 494-0400

$8.35

View Details
Imco 68268 M525C Solid Carbide .060 Corner Radius End Mill 5/8″ 5FL AlCrNX
Imco 68268 M525C Solid Carbide .060 Corner Radius End Mill 5/8″ 5FL AlCrNX

$80.00

View Details
New 5 PCS - 1/8" 4 FLUTE CARBIDE END MILL - TiALN COATED USA
New 5 PCS - 1/8" 4 FLUTE CARBIDE END MILL - TiALN COATED USA

$16.99

View Details
LOT ( 2 PCS ) GUHRING 5.7MM 609 5XD 3 FLUTE SOLID CARBIDE TIN DRILLING DRILLS
LOT ( 2 PCS ) GUHRING 5.7MM 609 5XD 3 FLUTE SOLID CARBIDE TIN DRILLING DRILLS

$24.75

View Details
7/32" DRILL BIT Jobber Length Solid Carbide 2 Twist Made In USA HTC 550-2188
7/32" DRILL BIT Jobber Length Solid Carbide 2 Twist Made In USA HTC 550-2188

$14.78

View Details
4 Flute 1/2" x 1-1/4" x 3" Solid Carbide Roughing End Mills - TiALN US
4 Flute 1/2" x 1-1/4" x 3" Solid Carbide Roughing End Mills - TiALN US

$26.45

View Details
5x 4 Flute 1/8" x 3/4" x 2-1/4" Solid Carbide Long End Mills TiALN Coated
5x 4 Flute 1/8" x 3/4" x 2-1/4" Solid Carbide Long End Mills TiALN Coated

$20.99

View Details
4 Flute Variable Helix Solid Carbide 5/8"x1-1/2"x3-1/2" End Mill - AlTiN Coated
4 Flute Variable Helix Solid Carbide 5/8"x1-1/2"x3-1/2" End Mill - AlTiN Coated

$37.99

View Details
NEW 3/8" HANITA VARIMILL WP15PE SOLID CARBIDE 5577102 END MILL CNC 5 FLUTE TOOL
NEW 3/8" HANITA VARIMILL WP15PE SOLID CARBIDE 5577102 END MILL CNC 5 FLUTE TOOL

$34.75

View Details
3 Flute, Solid Carbide Picatinny Rail Form Tool, AlTiN+TiSiN coated
3 Flute, Solid Carbide Picatinny Rail Form Tool, AlTiN+TiSiN coated

$45.98

View Details
1/4" 2 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated
1/4" 2 Flute 90 Degree Solid Carbide Chamfer Mill - Double End - AlTiN Coated

$16.49

View Details
1x 4 Flute 5/16" x 3/4" x 2-1/2" Variable Helix Solid Carbide End Mill TiALN USA
1x 4 Flute 5/16" x 3/4" x 2-1/2" Variable Helix Solid Carbide End Mill TiALN USA

$14.99

View Details
5 × 4 Flute 1/16" x 3/16" x 1/8" x 1-1/2" End Mill Solid Carbide-TiAlN Coated US
5 × 4 Flute 1/16" x 3/16" x 1/8" x 1-1/2" End Mill Solid Carbide-TiAlN Coated US

$15.80

View Details
SOLID CARBIDE CENTER DRILL #4 - 60 Degree USA CENTER DRILL HTC 585-1250
SOLID CARBIDE CENTER DRILL #4 - 60 Degree USA CENTER DRILL HTC 585-1250

$12.95

View Details
4 Flute 1/2" x 2" x 4" Solid Carbide Roughing End Mill - ALCrSiN Nano Coated
4 Flute 1/2" x 2" x 4" Solid Carbide Roughing End Mill - ALCrSiN Nano Coated

$38.99

View Details
Kodiak USA Made #50 (.0700) Diameter Solid Carbide Drill for Hardened Materials
Kodiak USA Made #50 (.0700) Diameter Solid Carbide Drill for Hardened Materials

$2.69

View Details
OSG 5/8 X 5/8 X 3 SC 4F SE STUB END MILL(SOLID CARBIDE)414-6250
OSG 5/8 X 5/8 X 3 SC 4F SE STUB END MILL(SOLID CARBIDE)414-6250

$27.00

View Details
1/16" (.0625") Solid Carbide End Mill 4 Flute Extended Length NIAGARA N55669
1/16" (.0625") Solid Carbide End Mill 4 Flute Extended Length NIAGARA N55669

$18.90

View Details
1/8" (.1250") solid carbide jobber drill - AlTiN Coated - Monster 450-101250B
1/8" (.1250") solid carbide jobber drill - AlTiN Coated - Monster 450-101250B

$11.75

View Details
New 5 PCS 5/16" 4 FLUTE LONG CARBIDE END MILL - TiALN COATED USA
New 5 PCS 5/16" 4 FLUTE LONG CARBIDE END MILL - TiALN COATED USA

$36.30

View Details
1/2" Carbide Tipped Hannibal Carbide Drill Bit
1/2" Carbide Tipped Hannibal Carbide Drill Bit

$21.95

View Details
Kodiak USA Made #56 (.0465) Diameter Solid Carbide Drill for Hardened Materials
Kodiak USA Made #56 (.0465) Diameter Solid Carbide Drill for Hardened Materials

$2.49

View Details
4 Flute 5/16" x 1-5/8" x 4" Variable Helix Solid Carbide End Mill - AlCrN Coated
4 Flute 5/16" x 1-5/8" x 4" Variable Helix Solid Carbide End Mill - AlCrN Coated

$19.99

View Details
4-Flute Solid Carbide Ball Nose 3/8" x 1" x 2-1/2" End Mill - AlTiN Coated
4-Flute Solid Carbide Ball Nose 3/8" x 1" x 2-1/2" End Mill - AlTiN Coated

$18.79

View Details
4pcs 5/32" Solid Carbide chucking reamer Tialn Coated 4 straight flute 515-TN532
4pcs 5/32" Solid Carbide chucking reamer Tialn Coated 4 straight flute 515-TN532

$38.00

View Details
HTC Carbide End Mill, 5/16 x 5/16 x 1/2 x 2, TiN Coated, 3 FL, Square | USA
HTC Carbide End Mill, 5/16 x 5/16 x 1/2 x 2, TiN Coated, 3 FL, Square | USA

$16.00

View Details
C14N-SCLCR09 Tungsten steel Boring Bar tool Solid Carbide for CCMT09T3
C14N-SCLCR09 Tungsten steel Boring Bar tool Solid Carbide for CCMT09T3

$34.19

View Details
1/2", 4 FLUTE CARBIDE ROUGHING (ROUGHER) END MILL, TiAlN COATED
1/2", 4 FLUTE CARBIDE ROUGHING (ROUGHER) END MILL, TiAlN COATED

$40.60

View Details
NOS #45 - No.45 - Number 45 .0820" Solid Carbide Twist Drill
NOS #45 - No.45 - Number 45 .0820" Solid Carbide Twist Drill

$4.75

View Details
5Pcs 4 Flute 1/4" x 1/2" x 2-1/2" Double End Solid Carbide End Mill AlTiN Coated
5Pcs 4 Flute 1/4" x 1/2" x 2-1/2" Double End Solid Carbide End Mill AlTiN Coated

$49.99

View Details
5° Solid Carbide Tapered End Mill 1/8" Tip Tin Coated 3 Flute
5° Solid Carbide Tapered End Mill 1/8" Tip Tin Coated 3 Flute

$16.99

View Details
#2 CENTER DRILL 82 degree Countersink Solid Carbide Made In USA HTC 586-0782
#2 CENTER DRILL 82 degree Countersink Solid Carbide Made In USA HTC 586-0782

$9.90

View Details
*SOLID CARBIDE* Chainsaw 14" 90PX052X R52 3/8" x 0.043" x 52 Link SEE VIDEO
*SOLID CARBIDE* Chainsaw 14" 90PX052X R52 3/8" x 0.043" x 52 Link SEE VIDEO

$44.98

View Details
5 Flute 3/4" x 2-1/4" x 5" Variable Helix Solid Carbide End Mill - AlCrN Coated
5 Flute 3/4" x 2-1/4" x 5" Variable Helix Solid Carbide End Mill - AlCrN Coated

$82.99

View Details
3/16" 4 FLUTE DOUBLE END ALTIN COATED SOLID CARBIDE END MILL HTC 200-4187
3/16" 4 FLUTE DOUBLE END ALTIN COATED SOLID CARBIDE END MILL HTC 200-4187

$12.99

View Details
6Pcs 4 Flute 1/8" - 1/2" Solid Carbide Ball Nose End Mills Set - AlTiN Coated
6Pcs 4 Flute 1/8" - 1/2" Solid Carbide Ball Nose End Mills Set - AlTiN Coated

$62.99

View Details
10Pcs 4 Flute 1/16" x 1/8" x 1/4" x 1-1/2" Solid Carbide End Mills AlTiN Coated
10Pcs 4 Flute 1/16" x 1/8" x 1/4" x 1-1/2" Solid Carbide End Mills AlTiN Coated

$33.99

View Details
Scrap Solid Carbide Endmill 17 Bls.
Scrap Solid Carbide Endmill 17 Bls.

$150.00

View Details
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED USA
5 PCS 3/8" 4 FLUTE CARBIDE END MILL - REGULAR LENGTH - TiALN COATED USA

$56.60

View Details
1x 5 Flute Solid Carbide 3/4" x 2-3/4" x 6" Long End Mill - TiALN Coated - USA
1x 5 Flute Solid Carbide 3/4" x 2-3/4" x 6" Long End Mill - TiALN Coated - USA

$84.99

View Details

© 2008-2024 solid-carbide (https://www.dinosaursoz.com/). All Rights Reserved.