Description: Kidde Hardwired Smoke & CO Alarm Sealed Lithium Battery Backup I12010SCO Worry-Free AC Wire-in Combination Smoke & Carbon Monoxide (CO) Alarm Sealed Lithium Battery Backup Part Number I12010SCOProvides protection from two hazards fire and CO in one unit with 10-year sealed lithium battery backup.Part Number - 21010408Product Description:The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarms overall performance in all fires, and significantly reduces the potential for a nuisance alarm. Product Benefits:Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. The i12010SCO contains a 10-year tamper proof backup battery that eliminates the need for battery replacement, and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke, fire and carbon monoxide, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The end of life chirp can be temporarily silenced, allowing for replacement at a more convenient time.Part Number (Ordering Number): 21010408Key Features:Sealed-In Lithium Battery Backup-no battery replacement required over the 10 year life of the alarm. Eliminates worry about removal or unauthorized deactivation of alarm.Voice Warning System-Verbally announces FIRE! or WARNING! CARBON MONOXIDE to help distinguish between threats.Smart Interconnect-Interconnects up to 24 Kidde devices (of which 18 can be initiating)Hush Feature-Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.Peak Level Memory-Announces CARBON MONOXIDE PREVIOUSLY DETECTED if alarm has detected CO level of 100ppm or higher since it was last reset.Ionization Sensing Technology-Ideal for detecting fast flaming and other types of fires.Green LED-Illuminates to indicate the unit is receiving AC power. Flashes once every 60 seconds to indicate battery only mode. Flashes once per second during alarm to indicate initiating alarm. Flashes once every 16 seconds to indicate smoke or CO previously detected. Flashes every 2 seconds while the alarm is in HUSH mode.Red LED-When a dangerous level of smoke or carbon monoxide is detected the red LED will flash. If the unit malfunctions, the red LED will flash and the unit will chrip every 30 secondsSpecifications:Model: i12010SCOPower Source: 120VAC, 60Hz 45mA max per alarm sealed lithium battery backupSmoke Sensor: IonizationCO Sensor: ElectrochemicalAudio Alarm: 85dB at 10ftTemperature Range: 40F (4.4C) to 100F (37.8C)Humidity Range: 10%-85% non-condensing relative humidity (RH)Size: 5.5 in diameter x 1.75 depthWeight: 1 lb.Wiring: Quick connect plug with 6 pigtailsInterconnects: Up to 24 Kidde devices (of which 18 can be initiating)Warranty: 10 year limited Product Details BrandKiddeManufacturerKiddeProduct TypeBattery BackupMpn21010408 Kidde part number 21010408AC Wire-in Combination Smoke & Carbon Monoxide (CO) AlarmIncludes Sealed Lithium-Ion Battery BackupPower Source: 120VAC, 60Hz 45mA max per alarm sealed lithium battery backup Check out my other items. -Powered by
Price: 99.19 USD
Location: Lancaster, Pennsylvania
End Time: 2024-07-24T15:48:19.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
UPC: 047871114085
Model Number: I12010SCO
Manufacturer: Kidde
Product Type: Battery Backup
Power Source: Battery
Year Manufactured: 2010
MPN: 21010408
Color: White
Item Depth: 1.75in.
Brand: Kidde
Number of Batteries: 1
Features: Battery Backup
Type: Smoke Detectors
Model: i12010SCO
Smart Home Protocol: Powerline/UPB
Item Weight: 1lbs.