JOHN DEERE 316/318/420 TOTAL FUEL SUPPLY LINE REPLACEME KIT (ONAN MOTOR ONLY) 3

Description: WHEN YOU'RE WORKING ON ONE OF THESE MODELS AND WONDERING IF YOU ARE GETTING FUEL. THIS FUEL LINE KIT IS TO REPLACE THE ORIGINAL LINES ON 316,318, AND 420 (ONAN ENGINE ONLY) JOHN DEERE GARDEN TRACTORS. THIS IS FOR THE TRACTORS THAT HAVE THE RESERVE/SHUT OFF VALVE. TWO LINES COME FROM THE GAS TANK TO THIS VALVE AND THE OTHER GOES FROM THE VALVE TO THE FUEL PUMP. THIS IS HIGH QUALITY HOSE MADE IN THE USA. YOU WILL RECEIVE 3 FUEL LINES 41 INCHES LONG ALONG WITH 3 SCREW CLAMPS, 3 OREGON SPRING CLAMPS, 4 EIGHT INCH INDUSTRIAL STRENGTH ZIP TIES, 2 RUBBER FUEL TANK GROMMETS, 1 - 6 INCH PIECE OF TYGON, 1 FUEL TANK FILTER WITH BALL VALVE [this is for the reserve side as the other fitting has a permanent screen attached to the fitting that you can clean and re-use] AND A EASY TO FOLLOW SET OF INSTRUCTIONS.TO INSTALL, MAKE SURE YOU ZIP TIE THEM OUT OF THE WAY FROM OTHER MOVING PARTS.USA MADE AND I SHIP USPS TO USA ONLY. I HAVE ANOTHER LISTING WITH ONLY THE GROMMETS AND FUEL FILTER IF YOU DON'T NEED ALL OF THIS.OVER ON THE RIGHT HAND SIDE OF THIS PAGE YOU CAN CLICK ON "SELLERS OTHER ITEMS" TO SEE OTHER REPAIR KITS. THANKS FOR LOOKING. HOSE DESCRIPTION: This is approved for use with leaded and unleaded gasoline, diesel, and gasoline blends of ethanol (E85), methanol, and ethers (up to the legal limits allowed by the EPA). They are temperature rated from -40 degrees Fahrenheit to 257 degrees Fahrenheit (-40 degrees Celsius to 125 degrees Celsius) with gasoline blends. These premium aftermarket replacement hoses are manufactured to meet your expectations for fit, form, and function. NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments. Nitrile tube that is spiral reinforced for enhanced durability Cable Zip Ties Heavy Duty 8 Inch, Ultra Strong Plastic Wire Ties with 80 Pounds Tensile Strength, Nylon Tie Wraps with 0.24 Inch/6mm Width, Indoor and Outdoor UV Resistant. FILTERDAPCO IN-TANK FILTER W/BALL CHECK, Manufacturer Part Number: 11962-AD Tygon F-4040-A PVC Fuel And Lubricant Tubing, 1/4" ID, 3/8" OD, 1/16" Wall, Yellow

Price: 79.25 USD

Location: Topeka, Kansas

End Time: 2024-10-14T15:32:27.000Z

Shipping Cost: 0 USD