Wireless Remote Control as RR-100 for Fujifilm X-H2 X100F X100T X100V X-E3

Description: This Wireless Remote is designed for cameras that has a remote shutter socket. The system works at a 433MHZ frequency and has 16 available channels. In addition, this wireless remote system adopts a technology to allow the transmitter trigger the receiver without direct line of sight up to 30 meters / 100 ft. The transmitter can trigger the camera shutter at five modes: single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot/bulb lock. Compatible with Select Fujifilm Cameras with 2.5mm mic socket or 2.5mm remote socket: Fujifilm X-T4 / X-T3 / X-T2 / X-T1 / X-T30 II / X-T30 / X-T20 / X-T10 / X-T100 / X-E3 / X-E2 / X-PRO3 / X-PRO2 / X-H1 / GFX 100S / GFX 100 / GFX 50S / GFX 50S II / GFX 50R / X100V / X100F / X100T Tips: For the Fuji X-T3 camera, do not plug to the 3.5mm headphone or mic jack on the left side (looking from the back), you need plug to the 2.5mm remote socket that's hidden behind a flap right above the sd slot cover on the right side. Important - How to use: 1. Install the CR-2 battery to the receiver and 23A battery to the transmitter. (Make sure to remove the plastic protective paper on the battery before installation) 2. Set the receiver and transmitter to the same channel (Normally the channel is already matched when you receive the package, so actually you don't need to set it, but if you ever reset the channel, make sure they are the same) 3. Once the batteries are properly installed and the channels are matched, when you press the shutter button on the transmitter, both the LED bulb on the transmitter and receiver will light up.(If not, please check if the battery is installed correctly or the battery is dead) 4. Once the transmitter matches the receiver, connect the receiver to the camera via the camera connecting cable which is included in the package, then set the transmitter into the working mode you want and finally press the shutter button to take a photo wirelessly. Attention Please: This remote does not work when camera is in movie mode, so it cannot control video start and stop! Product Highlights Compatible with different brands of cameras by replacing the JJC connecting cable 16 available channels Can trigger the shutter from 30 meters away Support single shot, 5 seconds delay shot, 3 continuous shots, unlimited continuous shots and bulb shot Transmitter can fire multiple receivers Receiver itself acts as a cable switch Package Contents JM transmitter x 1 JM receiver x 1 Connecting cord x 1 Instructional Manual x 1 Attention: 1.IMPORTANT: This item doesn't include any batteries. 2. Connecting cable can be sold separately, in the case that you need this item for different cameras, you can buy another cable. If you don't know which cable should be chosen, please contact us. 3.Please pay attention to adjust the receiver and transmitter to the same channel while using, and check if you installed batteries. Replacing JM-R2(II) replacing Fujifilm RR-100 Compatible with following Fujifilm cameras GFX 50S X-H1 X-Pro2 X-T3 X-T2 X-T1 X-T20 X-T10 X-T100 X-E3 X-E2S X-E2 X-A5 X-A10 X100F X100T X70 X30 XF10 GFX 50R X-T30 GFX100

Price: 20.99 USD

Location: Shenzhen,Guangdong

End Time: 2024-03-13T01:33:21.000Z

Shipping Cost: 0 USD