GolfWorks Golf Gripping Alignment Rib Pack

Description: For Everything Golf, We have you covered.GolfWorks Golf Gripping Alignment Rib Pack - 30 CountThe GolfWorks Rib Pack allows you to correctly align and easily install a rib inside any golf grip creating a reminder that will guarantee correct and consistent hand placement on every club in your bag. Pre-installing the rib onto the golf shaft allows for the grip logo to be installed in any position (logo up or logo down) depending on the golfers preference. Each rib is .035” thick which is slightly less than the USGA .040” maximum allowable rib thickness. Two alignment plugs, one for steel and one for graphite shafts, are included in pack to eliminate the chance of miss-aligning the rib during installation. Simply set the face angle into the required position while inserted into a grip clamp and install the plug with the center alignment stripe at 90º. Once the alignment plug is installed simply rotate the club 180º in the grip clamp until the alignment strip is again at 90º. Peel the paper from the back of the rib to expose the adhesive and attach the rib onto the butt end of the golf shaft. Each rib features a printed alignment line to further ensure the rib is installed correctly. Each rib is .035” thick, .25” wide and 9” in length. Each Rib Pack contains two alignment plugs and 30 individual golf grip ribs. For Everything Golf, We have you covered. We offer a variety of golf products from clubs, bags, tees, shafts, balls, club making supplies and more. As a small business, we offer you personalized customer service and 24/7 availability to assist you with questions regarding orders & general inquiries. Can't find what you're looking for?ShippingReturnsRefundsShippingReturnsRefunds Buyer is responsible for paying their own shipping costs for returning the item. Shipping costs are nonrefundable. Items that are used, not in original packaging or otherwise not in new, sellable condition are subject to a minimum 25 per cent (25%) restocking fee. If you have any questions on how to return your item, please contact us. Return Policy: Buyer has 30 calendar days to return an item from the date the buyer received the item. The item must be unused and in the same condition that the buyer received it, along with its original packaging and any accessories for a full product refund. Refunds: Once we receive the item back, we will inspect it and notify the buyer that we have received the returned item. We will immediately notify the buyer on the status of the refund after inspecting the item. We will initiate a refund to the original method of payment. What was ordered was delivered timely. Great service. Will buy again from this ebayer. Very prompt delivery.VIEW ALL FEEDBACKSee our other itemsThe GolfWorks Rib Pack allows you to correctly align and easily install a rib inside any golf grip creating a reminder that will guarantee correct and consistent hand placement on every club in your bag. Pre-installing the rib onto the golf shaft allows for the grip logo to be installed in any position (logo up or logo down) depending on the golfers preference. Each rib is .035” thick which is slightly less than the USGA .040” maximum allowable rib thickness. Two alignment plugs, one for steel and one for graphite shafts, are included in pack to eliminate the chance of miss-aligning the rib during installation. Simply set the face angle into the required position while inserted into a grip clamp and install the plug with the center alignment stripe at 90º. Once the alignment plug is installed simply rotate the club 180º in the grip clamp until the alignment strip is again at 90º. Peel the paper from the back of the rib to expose the adhesive and attach the rib onto the butt end of the golf shaft. Each rib features a printed alignment line to further ensure the rib is installed correctly. Each rib is .035” thick, .25” wide and 9” in length. Each Rib Pack contains two alignment plugs and 30 individual golf grip ribs. For Everything Golf, We have you covered.GolfWorks Golf Gripping Alignment Rib Pack - 30 CountThe GolfWorks Rib Pack allows you to correctly align and easily install a rib inside any golf grip creating a reminder that will guarantee correct and consistent hand placement on every club in your bag. Pre-installing the rib onto the golf shaft allows for the grip logo to be installed in any position (logo up or logo down) depending on the golfers preference. Each rib is .035” thick which is slightly less than the USGA .040” maximum allowable rib thickness. Two alignment plugs, one for steel and one for graphite shafts, are included in pack to eliminate the chance of miss-aligning the rib during installation. Simply set the face angle into the required position while inserted into a grip clamp and install the plug with the center alignment stripe at 90º. Once the alignment plug is installed simply rotate the club 180º in the grip clamp until the alignment strip is again at 90º. Peel the paper from the back of the rib to expose the adhesive and attach the rib onto the butt end of the golf shaft. Each rib features a printed alignment line to further ensure the rib is installed correctly. Each rib is .035” thick, .25” wide and 9” in length. Each Rib Pack contains two alignment plugs and 30 individual golf grip ribs. For Everything Golf, We have you covered. We offer a variety of golf products from clubs, bags, tees, shafts, balls, club making supplies and more. As a small business, we offer you personalized customer service and 24/7 availability to assist you with questions regarding orders & general inquiries. Can't find what you're looking for?Shipping Buyer is responsible for paying their own shipping costs for returning the item. Shipping costs are nonrefundable. Items that are used, not in original packaging or otherwise not in new, sellable condition are subject to a minimum 25 per cent (25%) restocking fee. If you have any questions on how to return your item, please contact us.Returns Return Policy: Buyer has 30 calendar days to return an item from the date the buyer received the item. The item must be unused and in the same condition that the buyer received it, along with its original packaging and any accessories for a full product refund. Refunds Refunds: Once we receive the item back, we will inspect it and notify the buyer that we have received the returned item. We will immediately notify the buyer on the status of the refund after inspecting the item. We will initiate a refund to the original method of payment. VIEW ALL FEEDBACKWhat was ordered was delivered timely. Great service. Will buy again from this ebayer. Very prompt delivery.See our other itemsThe GolfWorks Rib Pack allows you to correctly align and easily install a rib inside any golf grip creating a reminder that will guarantee correct and consistent hand placement on every club in your bag. Pre-installing the rib onto the golf shaft allows for the grip logo to be installed in any position (logo up or logo down) depending on the golfers preference. Each rib is .035” thick which is slightly less than the USGA .040” maximum allowable rib thickness. Two alignment plugs, one for steel and one for graphite shafts, are included in pack to eliminate the chance of miss-aligning the rib during installation. Simply set the face angle into the required position while inserted into a grip clamp and install the plug with the center alignment stripe at 90º. Once the alignment plug is installed simply rotate the club 180º in the grip clamp until the alignment strip is again at 90º. Peel the paper from the back of the rib to expose the adhesive and attach the rib onto the butt end of the golf shaft. Each rib features a printed alignment line to further ensure the rib is installed correctly. Each rib is .035” thick, .25” wide and 9” in length. Each Rib Pack contains two alignment plugs and 30 individual golf grip ribs.

Price: 24.99 USD

Location: Port Huron, Michigan

End Time: 2024-02-21T15:56:17.000Z

Shipping Cost: 0 USD