Description: Apiezon C Oil vacuum pump oil (Invoil C, M003, EMS) 500ml contents (listing photo shows actual item, UK pint bottle). One only. * Lowest vapor pressure of the three Apiezon® fluids * Works in many applications without an LN2 trap for general-purpose work * With a water-cooled baffle, ultimate pressures of 10-7 Torr are obtainable Apiezon oils consist of esters or specially selected hydrocarbon fractions. They were developed for vapour-diffusion pump fluids: High purity, very low pressure, very stable. Pressures lower than 10-7 torr obtainable No need for cold trap. Good pumping speed. No corrosive deposits or vapours. Physical Properties of Apiezon Oil Type C (now Invoil C) Diffusion Pump Oil Type C Vapour Pressure,torr @20 deg. C 10-7 Boiling Point, deg. C @ 1 torr 225 Flash Point (open cup) deg. F 510 Pour Point(ASTM) deg. F 5 Density, g/mL @ 20 deg. C 0.875 @ 40 deg. C 0.863 Viscosity, kinematic,cS @ 20 deg. C 283 @ 50 deg. C 90 @ 100 deg. C 10.6 Coefficient of Expansion per deg. C over 20-30 deg. C (ASTM) 0.00069 Thermal Conductivity Btu/in 0.96 APIEZON OIL C (now INVOIL C) Obtains the highest vacuum pressure (10-7 torr) of the Apiezon oils without the need of a cold trap. Suitable for most diffusion pump applications, including in electron microscopes and in vacuum coaters. This is an economic and effective substitute for Santovac 5 fluid. It should be noted that the ultimate vacuum is dependent on a suitably high backing vacuum and the out-gasing of TEM film and column components. Consequently the ultimate vacuum attained with Invoil C (Apiezon C) is very close to the theoretically much superior Santovac 5. This product is not hazardous and does not require an MSDS. A safety data sheet is available at apiezon.com
Price: 350 AUD
Location: Balaclava
End Time: 2024-12-14T08:19:07.000Z
Shipping Cost: 26.83 AUD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Model: C
MPN: C
Brand: Apiezon
